ATUS-Axial Piston Variable Pumps-APV-P2-500×1000

APV-P2-105

APV-P2/P3 Series Axial Piston Variable Pumps
Size NG
P2105
Displacement
105 cm³/rev
Speed
2300 rpm
Flow
241.5 L/min
Nominal pressure
320 bar
Max. Pressure
370 bar
Weight (approx.)
63 kg

Products and performance

The APV-P2-105 variable-displacement axial piston pump features an NGP2105 mounting interface, a displacement of 105 cm³/rev, and a rated speed of 2300 rpm, delivering a stable flow rate of up to 241.5 L/min. With a rated pressure of 320 bar and a peak pressure of up to 370 bar, it is exceptionally well-suited for high-load and heavy-duty applications.
Utilizing proven variable-displacement technology, the pump automatically adjusts its displacement based on real-time load requirements. This capability ensures stable system operation while effectively reducing energy consumption and hydraulic fluid loss, thereby significantly enhancing overall efficiency. Its advanced control system enables precise hydraulic regulation, optimizing both the positioning accuracy and operational stability of the host equipment.
Designed for high reliability and versatility, the pump maintains consistent performance even in demanding industrial environments. It is widely used in hydraulic systems for specialized vehicles, including equipment for oilfields, mining, and industrial material handling. Combining energy efficiency, high performance, and long-term operational reliability, the APV-P2-105 serves as an ideal core power component for high-pressure, heavy-duty industrial hydraulic systems.
ConeMac-Axial Piston Fixed Pump-APF-A2FO Series-Video

Energy‑Saving Performance

Automatic displacement adjustment reduces energy and hydraulic oil waste while keeping the whole hydraulic system stable in operation.

High Working Efficiency

Optimized power output lowers internal losses and effectively improves the comprehensive efficiency of the complete hydraulic equipment.

Precise Control

Sophisticated variable displacement technology achieves accurate hydraulic control and enhances equipment accuracy and operational stability.

High Adaptability

The pump series maintains consistent and stable working performance under various complex and harsh on‑site operating conditions.

Outstanding Reliability

Delivers stable and trustworthy hydraulic power supply for long‑time continuous operation in heavy‑duty working scenarios.

Specifications

APV-P2-105 General Information

Compact NGP2105 frame fits limited installation space of special vehicles for flexible layout on oilfield and mining machinery.
105 cm³/rev displacement balances power and compactness, well matched for medium-duty hydraulic circuits of heavy handling equipment.
Supports rated 2300 rpm high running speed, delivers quick response and ample instantaneous flow for cyclic working actions.
241.5 L/min rated flow provides sufficient hydraulic supply to satisfy continuous actuation demands of heavy-duty working devices.
320 bar nominal working pressure offers strong load capacity to cope with heavy lifting and driving tasks for mining rigs.
370 bar peak pressure provides reliable overload margin to withstand transient impact loads under severe operating conditions.
Only 63 kg lightweight structure reduces chassis load, easy for assembly and maintenance on mobile special vehicles.
Optimized for special vehicles, oilfield, mining and material handling equipment with outstanding environmental adaptability.

Product Features of APV-P2/P3 Series Variable‑Displacement Axial Piston Pumps

Axial piston variable-displacement hydraulic pump for open-circuit applications;
Optimized performance, ideally suited for mobile machinery;
Compact design with a unique port configuration;
High self-priming speed;
Features an integrated pre-compression volume as standard;
Capable of handling heavy-duty operating conditions (frame sizes 105 and 145) to meet increasing power density requirements;
Direct connection to a power take-off (PTO) for cost savings;
High efficiency with maximized output flow;
Suitable for operation at high altitudes;
Low noise levels and minimal flow pulsation.
- The factory assembly clearance between piston ball head and slipper ball socket is normally 0.015~0.025 mm.
- After prolonged service, the clearance enlarges. Parts can still be used if the clearance does not exceed 0.3 mm.
- Overlarge clearance will cause increased pulsation of pump outlet pressure and flow.
- In serious cases, loose slippers and slipper detachment may happen, further resulting in severe pump damage.
- Once signs of pressure and flow pulsation are detected, inspect slipper looseness in advance and conduct slipper re-clinching promptly.
- After long-term operation, concave deformation will form on the flat surface of the swash plate.
- The workpiece can be surface-ground followed by nitriding treatment.
- If the removed material thickness (e.g. 0.2 mm) does not completely eliminate the original nitrided layer, re-nitriding may be omitted.
- Hardness inspection of the swash plate surface is mandatory in such cases.
- Excessive bearing internal clearance will break the normal clearance of friction pairs and damage the oil film thickness of hydrostatic support, shortening the service life of piston pumps.
- The average service life of general bearings reaches 1000 hours (roughly more than two years). Bearings shall be replaced as appropriate after exceeding this service period.
- Replace with bearings of the identical model marked on the removed old bearing, or verified interchangeable alternatives.
- If grooves are scratched on the swash plate surface by piston ball heads (applicable to radial piston pumps), laser cladding with alloy powder is recommended for repair.
- Laser cladding ensures high bonding strength and hardness of deposited material without reducing the hardness of surrounding base metal.
- Manual overlay welding with chromium-type welding electrodes is an alternative method. The repaired swash plate surface requires re-heat treatment, preferably in a nitriding furnace.
- Regardless of the repair method adopted, the original dimensional accuracy, hardness and surface roughness of the swash plate must be restored.
Low oil Level Inclination Angle-Front Up
45 °
Low oil Level Inclination Angle-Back Up
45 °
Low oil Level Inclination Angle-Fuel Pump Side Up
45 °
Low oil Level Inclination Angle-Exhaust Side Up
45 °
Oil Sump Capacity-Upper Limit
14.2 L
Oil Sump Capacity-Lower Limit
12.4 L
Capacity of The Whole System
16.4 L
Main Causes and Troubleshooting Methods for Hydraulic Pump No Oil Suction / No Oil Discharge
  • Damage to the hydraulic pump, pump motor, or coupling between motor and pump. Replace the faulty pump, motor or coupling in a timely manner.
  • Too low oil level in the tank or excessively high pump installation position causes suction failure. Refill oil to the gauge level or adjust the pump height to keep the suction lift within the specified range.
  • Oil impurities and increased viscosity block the suction filter and oil pipe. Clean pipes and filters regularly and replace with qualified hydraulic oil as required.
  • Oil impurities and increased viscosity block the suction filter and oil pipe. Clean pipes and filters regularly and replace with qualified hydraulic oil as required.
Main causes and troubleshooting methods for hydraulic pumps discharging oil but lacking pressure and exhibiting reduced efficiency.
  • Severe wear of internal sliding parts leads to low volumetric efficiency and excessive axial/radial clearance. Replace the hydraulic pump or perform complete overhaul.
  • Damaged oil pipes and poor suction-side sealing cause air intake. Check all connections, reseal joints or replace damaged pipelines.
  • Blocked oil pipes and heavily contaminated filters. Clean pipelines and filters thoroughly to ensure full flow cleanliness.
  • Incorrect variable pump adjustment and severely worn relief valve spool. Readjust flow parameters and replace worn relief valve components for stable pump operation.
  • Motor speed below rated value and internal foreign impurities. Match the correct motor per specifications and clean internal impurities timely.
Major Causes of Excessive Noise During Hydraulic Pump Operation and Methods for Troubleshooting
  • Mostly caused by clogged filter, low oil level, air inhalation via oil seal and pipelines. Check tank oil level, repair pipelines, inspect pump seals, clean pipes and filters, and replace hydraulic oil periodically.
  • Excessively high oil viscosity, low oil temperature and entrained air bubbles. Select suitable hydraulic oil according to seasons.
  • Damaged coupling or misalignment between pump and motor leads to heavy vibration and loud noise. Inspect coupling wear, replace coupling and complete alignment strictly as installation requirements.
  • Operating speed exceeds rated value and mismatched driving motor. Reduce pump speed and select a suitable motor.
  • Worn shaft seal causes air intake; loose pump end cover bolts. Replace pump shaft seal and tighten cover bolts.
  • Low gear precision, poor contact or damaged internal parts of gear pump. Replace or grind gears, renew damaged components.
  • Insufficient axial clearance, out-of-tolerance perpendicularity or parallelism. Replace the gear pump entirely.
  • Blockage inside relief valve. Clean or replace the relief valve.
  • Vibration generated by unfixed pipelines. Secure all hydraulic pipelines firmly.
Main Causes of Oil Leakage from Hydraulic Pump Bodies and Methods for Rectification
  • Failure of the piston pump central spring breaks sealing between cylinder block and valve plate. Replace the spring and re-seal the mating surface.
  • Damaged oil seals or worn/poorly fitted gaskets at pipeline connections. Replace all defective sealing parts.
  • Severe wear of internal pump parts resulting in oversized operating clearances. Replace or refit the relevant components.
Main Causes of Hydraulic Pump Overheating and Troubleshooting Methods
  • Excessively high or low oil viscosity, and accumulated impurities after long service. Replace hydraulic oil in a timely manner and adopt oil with proper viscosity.
  • Heavy wear between pump side plates, shaft sleeves and gear end faces leads to overheating. Replace side plates, shaft sleeves or install a new hydraulic pump.
  • Small tank volume restricts heat dissipation and triggers high oil temperature. Increase tank capacity and expand heat dissipation area.
Installation Drawing
Download
Installation Manual
Download
Operation Manual
Download
Parts Catalogue
Download
Report & Certifcate
Download

Other Models

145 cm³/rev
Speed
2500 rpm
Flow
362.5 L/min
Mass (approx.)
76 kg
Nominal pressure
320 bar
105 cm³/rev
Speed
2600 rpm
Flow
273 L/min
Mass (approx.)
62 kg
Nominal pressure
320 bar
145 cm³/rev
Speed
2200 rpm
Flow
319 L/min
Mass (approx.)
78 kg
Nominal pressure
320 bar
105 cm³/rev
Speed
2300 rpm
Flow
241.5 L/min
Mass (approx.)
63 kg
Nominal pressure
320 bar
75 cm³/rev
Speed
2500 rpm
Flow
187.5 L/min
Mass (approx.)
44 kg
Nominal pressure
320 bar
60 cm³/rev
Speed
2800 rpm
Flow
168 L/min
Mass (approx.)
37 kg
Nominal pressure
320 bar
CCEC-Engine
CCEC-Engine
find more

Cummins China Engine

Cummins have 6 50:50 joint venture engine plants in China partnershipped with different Chinese automotive or equipment manufacturers, including DCEC-Dongfeng Cummins, CCEC-Chongqing Cummins, BFCEC-Beijing Foton Cummins, XCEC-Xi’an Cummins, GCIC-Guangxi Cummins, APCL-Anhui Cummins. EMAC Power is working with all of these engine plants, providing customers full ranges of customize engine power pack with all of Cummins engines produced in China.
find more

Fast Gear

The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.
ev-truck
ev-truck
find more

EV Truck

Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.
find more

DANA Axle

Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.
find more

Datong Gear

The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.
DFZ5258JSQSZ6D
find more

Crane Trucks

The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.

FREQUENTLY ASKED QUESTIONS

Get quick answers about this engine

With full ranges of emission standard from Euro 2 to Euro 7, Dongfeng Cummins producing 12 series automotive engines, started from 3.9 liter engine, to 15 liter engine, covering the power range of 125HP to 650HP.
Dongfeng Cummins automotive engine customize developing configurations for big vehicle OEMs in China, based on each of requirement, Dongfeng Cummins producing dozens of different configuration engines with same engine model number, which only SO-Shop Order will be different with each other, the SO number is the identify number of the engine configuration of each model.
Even with same engine model, different SO number engine can have very different configuration with each other, with different prices. Some of SO-Shop Order is not available for commercial market, such as restricted models (Usually for military specifications).
EMAC offering most common, cost effective models which also able to process the production in Dongfeng Cummins, which usually have following accessories as standard configuration.

Power OutPut
180 HP(132kW)
Max Torque
610 Nm
Displacement
5.9L
6 Inline
5.9L
Fuel System
Bosch Mechancial Pump
Emission Standard
Euro II

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s

Contact Us Now !!!

We are ready to provide professional support

Sales Director

Mr.Jasper Lee
Chat On whatsApp

Sales Manager

Mrs.Wendy Fu
Chat On whatsApp

Spare Parts Sales

Miss. Nora Cao
Chat On whatsApp

After-sales Manager

Miss. Tina Zhang
Chat On whatsApp

Merchandiser

Miss. Miss
Chat On whatsApp
SEND US A MESSAGE

Google reCaptcha: Invalid site key.

CONTACT INFORMATION
Traveling Guidence

phone

Tel: +86-755-8231-4520

Hours

Monday-Friday: 9am – 7pm | Saturday-Sunday: Closed

Headquarters

23RD FLOOR, LINSN TOWER, GUANGMING, SHENZHEN, CHINA. 518107

FIND US
Headquarters
23RD FLOOR, LINSN TOWER, GUANGMING, SHENZHEN, CHINA. 518107
Input error
cancel